AirPods are an integral part of many people’s daily routines. As such, it’s essential to understand how to check your AirPods’ battery life to avoid being caught with a dead device when you need it most. AirPods’ battery life can vary depending on usage, making it important to learn how to monitor battery levels accurately. In this article, we’ll explore the different methods of checking AirPods battery life, including troubleshooting when battery levels are low, as well as tips for maximizing your battery life.
5 Simple Steps to Check Your AirPods Battery Life
The simplest way to check your AirPods’ battery level is as follows:
- Ensure your AirPods are connected to your iPhone or iPad via Bluetooth, and the device is nearby.
- On your iPhone or iPad home screen, swipe down from the upper-right corner of the screen to reveal the Control Center.
- Locate the “AirPlay” icon on the bottom-right of the box that appears. You should see your AirPods listed under audio devices.
- Tap on the AirPods to see their battery status. You’ll see both the left and right AirPod’s battery percentage, as well as the charging case battery percent if they’re in the case.
- When you’re finished, exit the Control Center by swiping up from the bottom of the screen.
Note that if you’re using an Apple Watch, you can also check the battery levels of your AirPods from the Control Center. In both cases, make sure your devices are nearby as signal strength can impact battery life readings.
How to Know When Your AirPods Battery is Dying
If your AirPods’ battery is low, you’ll notice some telltale signs:
- Volume: Your AirPods’ volume may be lower than usual as the battery begins to die.
- Battery life: Your AirPods may only last for a few hours before needing to recharge, depending on usage.
- Performance: Your AirPods may experience slower performance or delay between the video and audio when watching videos.
When your AirPods’ battery is very low, you’ll get a notification on your device telling you to charge them. If your AirPods don’t turn on after completing these steps, make sure they’re securely in the charging case and the case has charged correctly.
Quick and Easy Guide: Checking Your AirPods Battery Status
While the first method is the simplest, there are additional ways to check your AirPods’ battery level:
- Charging case: Open the charging case while your AirPods are still inside, and the light will indicate the charging case battery life. The color of the LED light will change between green and amber depending on the charge level.
- Siri: Ask Siri about your AirPods’ battery life. Place your AirPods in your ears, and then say “Hey Siri, how’s the battery on my AirPods?”. Siri will inform you about the battery level, such as how much battery your AirPods have left.
- Widget: If you’re using an iPhone or iPad running iOS 14 or later, the Batteries widget will quickly show you the battery status of your AirPods and their case.
While each of these methods is relatively simple, it’s important to know that your charging case’s battery life and AirPods can differ within minutes of being taken out of the case.
Maximizing Battery Life on Your AirPods: A Comprehensive Guide
In general, the best way to prolong the battery life of your AirPods is to practice good battery health habits, such as:
- Turn off active noise cancellation feature or Transparency mode if you’re not using it.
- Lower volume levels if possible as higher volumes drain battery quicker
- Store your AirPods and charging case in a cool, dry place.
Additionally, many users wonder how to extend the life of their AirPods through software optimization:
- Update your device’s operating system, or firmware, regularly. This ensures that your AirPods are running on the latest firmware and can help optimize their battery life.
- Turn off automatic ear detection feature in settings as it saves battery life
FAQ: Checking AirPods Battery Levels
Here are the most frequently asked questions related to monitoring AirPods battery levels:
Q: Can I charge my AirPods without the charging case?
No, you cannot. AirPod charging requires the charging case. The charging case is designed to hold AirPods comfortably and allows for easy storage and protection.
Q: Why won’t my AirPods turn on?
If your AirPods don’t turn on, make sure they’re charged in the charging case properly. If the charging case’s LED light is not showing as amber, it means that the charging case is out of battery, which will prevent it from recharging the AirPods. Ensure that the charging ports are clean and free of debris.
Q: Why is there a discrepancy between the AirPods and charging case battery levels?
It’s entirely normal for there to be slightly different battery levels between the charging case and AirPods since the batteries in each are separate, and charge and discharge differently. This difference shouldn’t affect performance and accuracy when reading charge levels.
Monitoring your AirPods’ battery life is essential to ensure your day runs smoothly. While checking AirPods battery is quite simple and straightforward, sometimes you may encounter challenges, such as troubleshooting low battery life, knowing when they’re running out of power or maximizing battery life on your AirPods. It’s important to practice good AirPods battery life habits to ensure your device stays operating with longevity. We hope this comprehensive guide provided value for all AirPods users and gives users the insight and information they need to stay charged and listen with ease.